Injection molding machine specifications help a buyer check whether a specific machine can accommodate a part, mold and production plan. They are not a universal process recipe: the suitable machine and settings depend on the resin, shot, tool, part geometry and supplier’s validated process.
Compare the machine specification with the mold and part
| Specification group | What to compare | Buyer evidence |
|---|---|---|
| Injection unit | Available screw and injection-unit configurations, shot volume/weight, injection pressure and flow limits | Manufacturer data sheet for the exact machine and unit; supplier calculation for the specified resin and shot |
| Clamping unit | Clamp-force range, opening stroke and permitted load | Machine data and supplier’s project-specific fit assessment |
| Mold installation | Platen size, tie-bar spacing, mold-height range, daylight, nozzle and ejector interfaces | Machine and mold drawings checked together |
| Process and automation | Required motion, control, inserts, robot, temperature-control and peripheral equipment | Equipment list, interface assumptions and responsibility matrix |
| Capacity and condition | Whether the selected machine is available for the planned schedule and maintained for the intended work | Machine identification, planned capacity, maintenance evidence and project schedule assumptions |
Do not turn a machine maximum into a process target
A data sheet describes a machine configuration and published limits; it does not establish the validated operating conditions for a particular part. Compare the exact machine model and injection unit, then ask the production team to document the approved material, mold and process window for the program. Do not use a generic setting range from another resin or machine.
Machine makers publish model-specific data, such as clamping force, injection-unit options and mold installation dimensions. Review the exact revision rather than copying values from another size or configuration: ARBURG technical data and FANUC ROBOSHOT specifications.
Questions for a supplier
- Which exact machine and injection-unit configuration will run the part?
- Has the mold been checked against the selected platen, tie-bar, height, nozzle and ejector requirements?
- What evidence supports the proposed shot and material fit?
- Which peripherals and automation are included, and who maintains them?
- How is the machine assigned to the program’s required production window?
For process records after a machine is selected, see injection molding process-control checks and the injection molding DFM checklist.
