在精密注塑行業中，每項進步都伴隨著新的挑戰。今年，DAYIN塑膠製品有限公司識別出該行業面臨的一個重大問題：注塑成本的上升。以下是導致注塑成本增加的幾個主要因素：勞動力成本上升 在珠江三角洲地區，[…]
因素
关键的因素进行安装和调整国喷射模塑工厂
中國注塑工廠通常會專注於安裝與機器調整，從而開始為客戶生產塑膠模具產品。因此，我們該如何標準化此流程中的關鍵步驟？以下為日新塑膠就注塑模具安裝與除錯指南的簡要概述：模具預檢：在將模具安裝到 […]
影响因素短的镜头，在喷射模塑
In injection molding, a technical term known as “short shot” or “incomplete filling” refers to the phenomenon where the molten material fails to fully fill the mold cavity, particularly in thin-walled areas or at the end of the flow path. This occurs when the melt solidifies before completely filling the cavity, resulting in parts with […]
至关重要的因素对于选择一个注入模制造商
在工業生產中，射出成型是一種廣泛用於塑膠產品製造的常見生產方法。隨著市場需求持續增長，找到可靠的射出成型廠變得至關重要。因此，選擇射出工廠時應注意什麼？工廠規模與設備容量首要考慮的是规模 […]
導致模塑廠產品褪色的因素
In the production process of molded plastic factories, the issue of product fading is a complex and multifaceted challenge, rooted in several key factors. From DAYIN Plastics’ perspective, this phenomenon is primarily attributed to the physical and chemical properties of pigments and dyes, as well as the unique characteristics of the resins used. Specifically, the […]