Dartboard Game Modes: Product Planning for Brands and Venues

DAYIN Technical Team5 min read
DAYIN dartboard with three darts positioned on the scoring segments

Dartboard Game Modes: Product Planning for Brands and Venues

For a dartboard brand, importer or venue operator, game modes are product requirements. The mode name alone does not specify scoring, player flow, settings, language or validation. This B2B guide turns common dart games into a checklist for a board, display and firmware brief.

For supplier qualification, see DAYIN’s electronic dartboard OEM checklist. For product scope and sourcing, review the dartboard OEM/ODM service or contact DAYIN.

Define the product and the intended player

Start by naming the board type and target use: home recreation, a commercial venue, retail distribution or an event format. Specify whether scoring is manual or automatic, how many players or teams the product must support, and which languages, displays, sounds, apps or accessories belong in the SKU. Do not assume that every product needs the same game list.

If the product is promoted for a regulated event, identify the governing organization and the exact event rules. For example, WDF ranking criteria specify 501, straight in and double out for ranked tournaments unless otherwise approved. That is an event-specific format; it is not a universal requirement for every recreational or electronic dartboard. See the WDF ranking criteria and the WDF rules page.

Turn each game mode into a testable requirement

Game modeSpecify before productionExample validation
501 and 301Starting score, straight-in or double-in options, checkout rule, bust behavior, legs or sets, and any selectable variantsVerify start, turn change, remaining-score calculation, checkout, bust and match reset using the approved settings.
CricketTargets, bull treatment, mark/score behavior, team options and the exact rules variant used by the productExercise each target and bull state, then verify marks, scoring, turn order and end condition against the signed game specification.
English CricketHow this mode differs from Cricket in the product, including each player’s role and the end conditionUse scripted turns for both sides and confirm the display, scoring state and result match the written rules.
Around the ClockTarget sequence, allowed segments, miss handling and whether doubles or triples are part of the modeTest the sequence at the first, middle and final target, plus a miss and a repeated hit.
KillerPlayer setup, qualification, lives, turn order and the condition that removes a playerCheck player registration, qualification, life changes, elimination and ties using the selected rule variant.
KnockoutScoring event that triggers elimination, player count, turn order and tie or final-round behaviorRun a scripted round with a tie, an elimination and a final player to confirm the state transitions.

These are product-specification prompts, not universal rules for every league. Record the actual scoring sequence and selectable options in the product requirement document and user manual.

Check the board, scoring and interface together

  • Board and segment format: confirm the intended board type, target market and rules. Keep a steel-tip event requirement separate from the specification for an electronic or soft-tip product.
  • Scoring behavior: for an automatic-scoring model, test each supported scoring area, turn changes, missed or rejected throws, bounce-outs, resets and error recovery. For a manual-scoring model, validate the board markings and the instructions supplied with it.
  • Display and controls: check that the active player, score, mode and settings remain clear during a match. Confirm menu wording, sound and language against the approved interface files.
  • Firmware and app: record the firmware version, configuration, connectivity and update behavior that belong to the approved sample. Re-test affected modes after a software or sensor change.
  • Venue use: define mounting, power, cable routing, maintenance access, spare parts and the operator instructions needed for the installation.

Game-mode RFQ checklist

Include in the buyer briefAsk the supplier to return
Board type, target market and intended userProposed hardware and production route, with any limitations clearly listed
Required game modes and rules variantsMode-by-mode settings, player options and scoring definitions
Display, language, sound, app and connectivity requirementsInterface scope, firmware versioning and sample configuration
Event or league format, where applicableEvidence showing which named requirements the product has been checked against
Sample approval and release criteriaTest cases, acceptance results, issue handling and change-control process
Forecast, packaging and ship-to marketQuotation assumptions, capacity, lead time, packaging scope and required market documentation

Approve the sample before launch

Use a production-intent sample with the approved board, sensors, display, firmware and settings. Keep a record of the test case, expected result, actual result, software version, open issue, action owner and approval. Confirm that the packaging and user manual describe the same modes and options as the tested sample.

After approval, define how the supplier must request approval for a sensor, board, firmware, component or production-site change. If a venue or customer requires a particular rules format, keep that requirement in the order specification so future revisions can be checked against it.

Frequently asked questions

Which dart game modes should an electronic dartboard include?

Choose the modes for the target buyer and market. List each mode, rules variant, player options and scoring behavior in the product brief instead of relying on a generic feature list.

Is 501 double-out required for every dartboard?

No. The WDF ranking criteria use 501 straight in and double out for WDF ranked tournaments unless otherwise approved. Other products and events should follow the rules specified by their intended customer or governing organization.

How should a buyer test automatic scoring?

Agree test cases for supported segments, turn order, mode-specific scoring, missed or rejected throws, resets and recovery. Approve results on the production-intent sample and retain its firmware/configuration details.

What information should a dartboard OEM RFQ include?

Include board type, target market, game modes and variants, display and language requirements, sample tests, forecast, packaging and any event or market requirements. The electronic dartboard OEM checklist provides a related supplier-qualification guide.

Discuss an OEM or ODM project

Share your board type, target market, game-mode specification, sample acceptance tests, forecast and packaging requirements with DAYIN. Review the dartboard OEM/ODM service and contact the team to discuss project scope.